Specifications

4
VOCIA LIFE SAFETY INTERFACE 16 (LSI-16/LSI-16e)
The LSI-16/LSI-16e are networked devices that serve as an interface between a Vocia system and emergency or re alarm systems.
The LSI-16/LSI-16e may accept up to three sources of power: main power is from an external, standards compliant, battery backed 24V
DC source but the LSI-16/LSI-16e can also utilize Power over Ethernet (PoE) delivered via either of its two network ports. The device is
equipped with parallel I/O ports for direct interface to re and emergency control equipment. The LSI-16/LSI-16e uses Ethernet-based
control protocols to function within a Vocia system.
LSI-16 FEATURES
• Parallel I/O ports for direct interface with re alarm
and emergency equipment
• 8 monitored I/O and 8 control inputs
• Redundant network connection and power supply options
• Power and data over a single Ethernet cable
• Local storage of conguration data
• Rotary switches for unit identication
• Accepts the Interface Module 16 (IM-16) for 16 additional
general purpose inputs
• Status LEDs
• Rack mountable (1RU)
• CE marked and RoHS compliant
• Up to 4 discrete emergency inputs
• Up to 500 virtual inputs via RS232 port or Ethernet
• EN 54-16 certied
• EN 60849 and AS 60849 veried
• Covered by Biamp Systems’ warranty
LSI-16e FEATURES
• Parallel I/O ports for direct interface with re alarm
and emergency equipment
• 8 monitored I/O and 8 control inputs
• Redundant network connection and power supply options
• Power and data over a single Ethernet cable
• Local storage of conguration data
• Rotary switches for unit identication
• Up to 4 discrete emeregency inputs
• 16 additional general purpose inputs can be programmed
to play an emergency message, enable zone reset or zone
silence; maximum of 10 inputs can be assigned per emer-
gency zone
• Each general purpose input can be programmed as TTL, high
range or monitored high range
• General purpose inputs allow monitoring for short to ground
and open circuit
• Up to 500 virtual inputs via RS232 port or Ethernet
• Provides system health monitoring via RS232 port or Ethernet
• Status LEDs
• Rack mountable (1RU)
• CE marked and RoHS compliant
• EN 54-16 certication pending
• Covered by Biamp Systems’ warranty