Specifications

SPM412e

INTRODUCTION

The SPM412e Stereo Preamp/Mixer provides four stereo line inputs, one mic/line input, and two independent outputs. With input sourc

selection, automatic page-over mutin

, and remote control functions, the SPM412e is ideall

suited for applications such as restaurants,

bars, meeting rooms, aerobics studios, and school gymnasiums. The SPM412e is extremely versatile, yet cost-effective, and is eas

install and operate.

SPM412e features include:

♦ four stereo line inputs with trim controls & RCA connectors

♦ balanced mic/line input on plug-in barrier strip connector

♦ trim, pad, peak indicator, & level control on the mic/line input

♦ +24 volt phantom power switchable on the mic/line input

♦ balanced stereo main output on plug-in barrier strip connector

♦ balanced mono zone output on plug-in barrier strip connector

♦ front panel push-buttons select stereo inputs & adjust main level

♦ simultaneous selection of multiple stereo inputs from front panel

♦ front panel display shows stereo input selections & main level

♦ treble, bass, and balance controls for the stereo main output

♦ rear panel switch defeats treble & bass at stereo main output

♦ rear panel switch converts the stereo main output to mono

♦ limiter with threshold control for the stereo main output

♦ front panel rotary level control for the mono zone output

♦ automatic talkover muting when the mic/line input is in use

♦ internal jumpers assign mic/line input pre or post treble & bass

♦ internal jumpers assign mic/line input pre or post main level

♦ internal jumpers assign mic/line input to main and/or zone

♦ internal jumpers assign stereo line inputs to main and/or zone

♦ internal jumpers assign talkover muting to main and/or zone

♦ separate internal talkover mute adjustments for main and zone

♦ wall-mount, custom, or third-party remote controllers

♦ wall-mount ‘Controller’ overrides commands from front panel

♦ remote control affects stereo input selection & main level

♦ default settings can be defined & stored for recall at power-up

♦ incorporates AES recommended grounding practices

♦

marked and UL / C-UL listed power source

♦ covered by Biamp Systems' five-year warranty