Tesira® EX-MOD Input and Output Expander Operation Manual May 2012 Biamp Systems, 9300 SW Gemini Drive, Beaverton, Oregon 97008 U.S.A. (503) 641-7287 www.biamp.
TABLE OF CONTENTS TESIRA EX-MOD. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Benefits. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Features. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
TESIRA EX-MOD TESIRA EX-MOD The Tesira® EX-MOD is a modular expander device that is designed for use with Tesira SERVER and SERVER-IO devices. It can be configured with up to three 4-channel input and/or output expander cards for a maximum of 12 channels. The EX-MOD expander communicates with the Tesira AVB network for audio networking, configuration and control.
TESIRA EX-MOD FRONT PANEL The front panel of the EX-MOD expander displays four multi-color LEDs that provide information about the status of the expander.
TESIRA EX-MOD REAR PANEL 1 2 3 4 1 – Grounding pin. This pin is for grounding the chassis of the expander. 2 – AC Power inlet 3 – AVB/ Control Connection. Uses a standard RJ-45 connector with CAT-5, CAT-5e, CAT-6 or CAT-7 cabling. The maximum distance between any unit and an Ethernet switch is 328 feet (100 meters). This connection is for sending and receiving AVB audio signals as well as sending and receiving data between the expander device and the Tesira system.
TESIRA EX-MOD SPECIFICATIONS Tesira EX-MOD Specifications Frequency Response (20Hz~20kHz @ +4dBu): Phantom Power: +0/-0.25dB THD+N (20Hz~20kHz): @ 0dB Gain, +4dBu In @ 54dB Gain, -50dBu In < 0.006% < 0.
FCC COMPLIANCE FCC NOTICE - CLASS A DIGITAL DEVICE NOTE: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment.
WARRANTY BIAMP SYSTEMS IS PLEASED TO EXTEND THE FOLLOWING 5-YEAR LIMITED WARRANTY TO THE ORIGINAL PURCHASER OF THE PROFESSIONAL SOUND EQUIPMENT DESCRIBED IN THIS MANUAL 1. B iamp Systems warrants to the original purchaser of new products that the product will be free from defects in material and workmanship for a period of 5 YEARS from the date of purchase from an authorized Biamp Systems dealer, subject to the terms and conditions set forth below. 2.
COMPLIANCE DoC TXMOD-201205c EC Declaration of Conformity Biamp Systems Corporation, as manufacturer having sole responsibility, hereby declares that our delivered version the following described product complies with the applicable provisions of the DIRECTIVES below except as noted herein. Any alterations to the product not agreed upon and directed by Biamp Systems Corporation will invalidate this declaration.
COMPLIANCE RoHS COMPLIANT This Biamp product, including all attendant cables and accessories supplied by Biamp, meets all requirements of EU Directives 2002/95/EC of January 27, 2003, and 2005/618/EC of August 18, 2005, the EU RoHS Directives. An EU RoHS Materials Content Declaration document may be obtained at www.biamp.
