Tesira® EX-LOGIC Logic and Control Expander Operation Manual September 2012 Biamp Systems, 9300 SW Gemini Drive, Beaverton, Oregon 97008 U.S.A. (503) 641-7287 www.biamp.
TABLE OF CONTENTS TESIRA EX-LOGIC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Benefits. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Features. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
TESIRA EX-LOGIC The Tesira® EX-LOGIC is a half-rack logic box for use with Tesira SERVER and SERVER-IO devices. The EX-LOGIC provides both logic inputs and outputs and, through software, can be configured as a control interface. There are 16 total connections that can be used as inputs or outputs. 12 of the connections are designed as logic connections only and will accept contact closure or 5V TTL when used for logic or sink a maximum of 40V/300mA per output.
TESIRA EX-LOGIC FRONT PANEL The front panel of the expander displays four multicolor LEDs that provide information about the status of the expander.
TESIRA EX-LOGIC REAR PANEL 1 2 3 4 5 1 – Grounding pin. This pin is for grounding the chassis of the expander 2 – Ethernet data connection. Uses a standard RJ-45 connector with CAT-5, CAT-5e, CAT-6 or CAT-7 cabling. The maximum distance between any unit and an Ethernet switch is 328 feet (100 meters). The expander must receive PoE (IEEE 802.3af) power on this connector in order for proper operation. This connection is for sending and receiving control data with the Tesira server.
TESIRA EX-LOGIC SPECIFICATIONS Tesira EX-LOGIC Specifications Logic Input Trigger: LED Driver: System Network Connection: Power: Overall Dimensions: Height: Width: Depth: Logic Output Type: Contact-Closure or 5V TTL Weight: 5V/10mA per output Open Collector; Sink 40V/300mA per output 2 lbs (1 kg) Compliance: Ethernet FCC Part 15B (USA) CE Marked* (Europe) C-Tick (Australia) RoHS Directive (Europe) PoE IEEE 802.3af Class 1 1.5 inches (38 mm) 8.5 inches (216 mm) 7.
FCC COMPLIANCE FCC NOTICE - CLASS A DIGITAL DEVICE NOTE: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment.
WARRANTY BIAMP SYSTEMS IS PLEASED TO EXTEND THE FOLLOWING 5-YEAR LIMITED WARRANTY TO THE ORIGINAL PURCHASER OF THE PROFESSIONAL SOUND EQUIPMENT DESCRIBED IN THIS MANUAL 1. B iamp Systems warrants to the original purchaser of new products that the product will be free from defects in material and workmanship for a period of 5 YEARS from the date of purchase from an authorized Biamp Systems dealer, subject to the terms and conditions set forth below. 2.
COMPLIANCE DoC TXLOG-201205d EC Declaration of Conformity Biamp Systems Corporation, as manufacturer having sole responsibility, hereby declares that our delivered version the following described product complies with the applicable provisions of the DIRECTIVES below except as noted herein. Any alterations to the product not agreed upon and directed by Biamp Systems Corporation will invalidate this declaration.
COMPLIANCE RoHS COMPLIANT This Biamp product, including all attendant cables and accessories supplied by Biamp, meets all requirements of EU Directives 2002/95/EC of January 27, 2003, and 2005/618/EC of August 18, 2005, the EU RoHS Directives. An EU RoHS Materials Content Declaration document may be obtained at www.biamp.
