Specifications
10
APPLICATIONS
DC out
device #
link port
baud rate
15 watts
class 2 wiring
50/60 Hz
~
27V
1
2
4
8
16
32
19200
9600
2400
last
MADE IN U.S.A.
BIAMP SYSTEMS
Portland, Oregon
an affiliate of
Rauland-Borg Corp.
ADVANTAGE
®
EQ281/8
in
patch
pad
in
patch
pad
in
patch
pad
in
patch
pad
in
patch
pad
in
patch
pad
in
patch
pad
in
patch
pad
main
patch
main stack
DC out
12345678
E17934
+48VDC 4W
Class 2
±12VDC 15W
Class 2
main out
DC out
patch in/out patch in/out patch in/out patch in/out
4321
VCA control voltage inputs
+10V gnd RC4 RC3 RC2 RC1
DC in
ADVANTAGE RCII
MADE IN U.S.A.
Remote Control
DC out
MADE IN U.S.A.
patch in/out patch in/out patch in/out patch in/out
4321
gnd
remote 4remote 3remote 2
VCA control
voltage outputs
IR2 IR3 gnd IR2 IR3 gnd IR2 IR3 gnd 8765
Digital Remote Control
ADVANTAGE DRC 4+4
serial port &
logic outputs
to amplifier
ADVANTAGE
®
ONE
ADVANTAGE
®
RCII
ADVANTAGE
®
DRC 4+4
serial port
output
input
RP-S4
1 2
34
Presets 1~4
* jumpers removed for
momentary operation
Computer,
AMX
®
, or
CRESTRON
®
controller
logic inputs
ADVANTAGE
®
RP-S4
Equalization and Remote Control of a Mono Sound System
This application shows an ADVANTAGE
®
ONE, an ADVANTAGE
®
DRC 4+4, and an ADVANTAGE
®
RCII connected together to provide an
eight input mic/line mixer with remote control of channel levels. This could be any mono sound system. The EQ281/8 provides up to eight
selectable preset equalization curves, to accommodate changes in acoustics or program material. An ADVANTAGE
®
RP-S4 is connected
to the EQ281/8 Logic Inputs for selecting Presets 1~4. A custom switch panel can be used to access all eight presets. The EQ281/8 Link
Port is connected to the DRC 4+4 Serial Port. This allows remote control and preset selection, not only of equalization, but of channel
levels as well. Equalization and channel levels are controlled via RS-232, while only preset selection is controlled via switches.