Specifications

SETUP

CONFIGURATION OPTIONS SCREEN

The Configuration Options screen is used to select options which customize the operation of the NMP200. At the top of the Configuration

Options screen, the Serial Number

and Firmware Version of the NMP200 will be displayed. BiampWin software can operate ‘off-line’ (with

no product connected) by opening a ‘new’ file for the desired product. The Serial Number and Firmware Version are not displayed for

‘new’ (‘off-line’) files. Device Name

allows a custom name to be given to the particular NMP200, by entering up to 30 characters of text.

The Device Name will be stored in the NMP200 memory, and will be displayed on the title bar of the Main screen whenever that NMP200 is

accessed with the software. Device Number

allows a device number (0~63) to be assigned to the currently active NMP200. This allows

multiple NMP200 (or other ADVANTAGE

programmable products) to be individually controlled when linked together. Unique device

numbers must be assigned to each device before the devices are linked together. Temperature

selects the desired air temperature to be

used in calculating Velocity of Sound

(seen below). Temperature, and the resultant Velocity of Sound, are global parameters which affect

distance/delay calculations for the Delay section. Set Password

allows the NMP200 to be assigned a password (up to seven characters),

which will then be required before any future software communication with that unit is allowed. NOTE: When multiple programmable

products are connected in a system configuration (via Serial & Link Ports), it is strongly recommended that only one unit in the system be

assigned a password. A single unit having a password will prevent software communication with all units in the system. Communication

with other units will still be possible, but only by first dis-connecting them from the unit which has been assigned a password. Help

provides additional instruction. Close

will close the Configuration Options screen.