Specifications

6
MODIFICATIONS
CAUTION: THE FOLLOWING INFORMATION IS FOR USE BY QUALIFIED INSTALLATION/SERVICE PERSONNEL.
Removable Rack-Handles:
The CMA Series have removable rack-handles. To remove the rack-handles: 1) Remove the two screws
from the side of each rack-handle. 2) Remove the rack-handles. 3) Replace the mounting screws in the sides of the chassis.
Security Cover:
The CMA Series includes a removable front panel security cover. A hole in the security cover provides access only to
the power switch. To remove the security cover: 1) Using a 3mm hex wrench, loosen the two captive security cover mounting screws. 2)
Remove the security cover.