Datasheet

ManualsBrandsBI Technologies ManualsDiode ArraysDiode array 8 Diodes 9 Pins Common anode 100 mA

Single-In-Line Conformal

Coated RoHS Compliant

D Series

www.bitechnologies.com www.irctt.com www.welwyn-tt.com

General Note

TT electronics reserves the right to make changes in product speciﬁcation without notice or liability.

All information is subject to TT electronics’ own data and is considered accurate at time of going to print.

03.12

· 4 to 14 Leads

· Standard and custom circuits

· Space saving design

Speciﬁcation

Reverse Voltage, V

80V

Reverse Current, I

1.0µA (V

= 70V)

Forward Current, I

100mA Average, 300mA Surge (1µs Max.)

Forward Voltage, V

1.2V @ I

= 100mA

Package Power, P

PKG

200mW @ 25

Reverse Recovery Time, t

4ns (V

= 6V, I

= 5mA, R

= 50Ω)

Capacitance, C 5.5pF (V

= 6V, f = 1MHz)

Storage Temperature Range - 55°C to 125°C

Operating Temperature Range - 25°C to 80°C

Summary of content (4 pages)

PAGE 1
Single-In-Line Conformal Coated RoHS Compliant D Series · · · 4 to 14 Leads Standard and custom circuits Space saving design Specification Reverse Voltage, VR 80V Reverse Current, IR 1.0µA (VR = 70V) Forward Current, IF 100mA Average, 300mA Surge (1µs Max.) Forward Voltage, VF 1.2V @ IF = 100mA Package Power, PPKG 200mW @ 25oC Reverse Recovery Time, trr Capacitance, C Storage Temperature Range Operating Temperature Range 4ns (VR = 6V, IF = 5mA, RL = 50Ω) 5.
PAGE 2
Single-In-Line Conformal Coated RoHS Compliant D Series Specification Circuit Type Polarity “A” Polarity “C” 1 N = 4 to 14 2 N = 3 to 13 (Odd #) 3 N = 4 to 14 (Even #) 5 N = 4 to 14 General Note TT electronics reserves the right to make changes in product specification without notice or liability. All information is subject to TT electronics’ own data and is considered accurate at time of going to print. www.bitechnologies.com www.irctt.com www.welwyn-tt.com © TT electronics plc 03.
PAGE 3
Single-In-Line Conformal Coated RoHS Compliant D Series Outline Dimensions (Inch/mm) Typical Part Marking General Note TT electronics reserves the right to make changes in product specification without notice or liability. All information is subject to TT electronics’ own data and is considered accurate at time of going to print. www.bitechnologies.com www.irctt.com www.welwyn-tt.com © TT electronics plc 03.
PAGE 4
Single-In-Line Conformal Coated RoHS Compliant D Series Ordering Information D 8-3 C Model Polartity (see schematic) A = Common Anode ( circuit 1, circuit 2) Annode is at pin number 1 (circuit 3, circuit 5) Number of pins: 4 to 14 Circuit type: 1 = Bussed with pin 1 in common. 2 = Bussed with centered common. 3 = Isolated. 5 = Dual termination.