User manual

Page 6
9. Specification
DC Power
Connector type 2.1mm DC power jack (centre positive)
Input voltage 12 to 18 Volts DC
Input current 10mA standby (typical)
125mA active (no signal)
2.5A peak
Line Level Audio Input
Connector type 3.5mm Mono or Stereo line level
Input voltage range 160mV to 1.6mV pk-pk
Input impedance 10kΩ (±2kΩ) nominal
Speaker Level Audio Input
Connector type 2 x 4mm socket/screw binding posts (mono)
Input voltage range 350mV to 3.5V pk-pk
Input impedance 8Ω (±2Ω) nominal
Input power rating 1.5W max
Audio Output
Speaker Output power 10W peak (supply voltage of 18V)
Bandwidth 50Hz to 4.3kHz
Volume levels 16 levels (3dB steps)
Headphone output 3.5mm mono or stereo (8 to 64 Ohms)
DSP Noise Cancellation
Levels 8 levels + off
Noise reduction 9dB to 35dB
Tone reduction 4dB to 65dB
Indications
Status LED Multicolour LED (red, amber, green).
Audio tones Power-up, power-down, DSP level, volume and memory store.
Controls
Power/Volume Digital rotary encoder with push function
DSP level Digital rotary encoder with push function
Physical
Weight 1.65kg
Dimensions 200(H) x 150(D) x 160(W)mm