Technical information

ANEM Operating ManualANEM Operating Manual
Page 6
2. Module Overview.
2. Module Overview.
2.1 Whats in the box.
The ANEM is supplied with the following. Please check
that all of the items are present.
 1 off ANEM MKII module
 1 off Fused DC power lead
 1 off 3.5mm mono leads
 1 off Operating manual
 4 off Self adhesive rubber feet
 1 off Hook and eye fastener strip
2.2 Getting Started.
Power connector
12 - 15V dc 300mA
centre positive
Audio In
(from equipment)
Audio out
(to loudspeaker)
Power on/off
bypass button
DSP function
button
DSP function LED
Figure 2. Connectors
Figure 3. Controls
Page 23
Start
Increase input
level
Over load LED
illuminates?
No
Yes
Reduce input
so LED goes
out
Increase output
level P1
Sufficient
output volume?
Supply voltage
<13.8 Vdc
Input level
too low
Increase
supply
voltage
Finish
Yes
Disconnect
R6
(see section 3.3)
Over load LED
illuminates?
Add additional
amplification
No Yes
No
No
Yes
5.2 Insuffucient output volume
5. Troubleshooting
Input
signal
Overload
LED on
Reduce input
level
Increase
output level
P1
Apply
audio signal
Increase input
signal
P2
No
Yes
No
Yes
Audio
out?
Finish
Start
Yes
No
5.1 No audio out
5. Troubleshooting.
Speaker/
Headphone switch
SP