Owner`s manual
Quick Install Steps
The purpose of this section is to provide a fast
and easy overview of installation and setup for
your BG loudspeakers. However, your
speakers are high performance devices which
will benet from taking time and attention dur-
ing set-up. Reading the entire manual will also
greatly assist in achieving the best possible per-
formance.
If you encounter any problems or difculties in
installation, please refer to the Installation portion
of this manual.
If any questionss are, please contact your autho-
rized BG dealer, as they will provide you with the
appropriate technical and eld support.
Step 1 : Unpacking and Assembly
Open the package and remove your new BG
speaker form it’s packing materials.
Screw in spiked feet or stick on rubber feet and
position them as needed. Adjust them so that the
speaker is stable and rests on all four feet.
Step 2: Placement
Place your Z-Series loudspeaker in the desired
location. (Please refer to our setup guide on
pages 5-10.)
Step 3: Signal Connection
Using the speaker cabling of your choice, con-
nect the terminals on the rear panel of your
speakers.
Pay attention to connect the speaker’s red termi-
nal post to the ampliers positive (+) post and the
speaker’s black terminal to the amplier’s nega-
tive (-) post. Tighten down the terminals onto the
connectors or wire.
Step 5: Congure and Calibrate
In multi-channel systems and when using a sub-
woofer, set the crossover, distance and level of
each speaker. (Please refer to our setup guide
on pages 5-10.)
Step 6: Enjoy!
3