Owner`s manual

12
BG Planar Ribbon Technology
Concept
BG’s Radia Planar Ribbon technology consists
of an extremely thin, low mass, high-temperature
polymer diaphragm as a carrier for at aluminum
conductors made via a special etching process.
This is suspended within a symmetrical mag-
netic eld created by a double sided (push-pull)
Neodymium magnet structure. As the alternat-
ing electrical current of the musical signal ows
though the conductors, the diaphragm moves in
and out producing sound.
Key Benets
- Low Mass, High Temp Diaphragm - for high
power handling. outstanding transient response
and damping,
- Push-Pull Symmetrical Magnet Structure – pro-
duces symmetric magnetic eld for high sensitiv-
ity and extremely low distortion.
- High strength Neodymium Magnets – are 20
times stronger than ceramic magnets resulting in
higher sensitivity, higher output and reduced size
and weight.
- Patented PDR technology and patent pending
NEO10 technology allow wider high frequency
dispersion while maintaining extended bandwidth
and new levels of output without audible distor-
tion.
- Resistive Impedance - non-reactive load is
amplier friendly. Very low self inductance mini-
mizes intermodulation and phase distortion for
increased accuracy and coherency.