BG Tech America, Inc. warrants that its Early Warning Radar Detectors, and the component parts thereof, will be free of defects In workmanship and materials for period of one (1} year from the date of first consumer purchase. This warranty covers all defects in materials and workmanship. This warranty does not apply if the unit has be subject to physical abuse, Improper Installation, modification, or If the housing or serial number of the unit has been removed.
MOUNTING GUIDELINES + Mount the unit as low as possible near the center of the windshield. (See Mounting Instructions) Do NOT mount your unit behind wipers, armaments, mirrored sunscreen glass, etc. as these obstructions have metal surfaces that may affect radar/laser signals and reduce critical warming time. Note: Tinted glass dex not affect response. Avoid placing the unit in direct contact with windshield.
Problem Cause of Problem Solution WINDSHIELD MOUNTING 1 Attach the suction cups to the bracket. 2 Make sure the suction cups and your windshield are clean and push the bracket firmly onto the windshield. 3 Before attaching the Radar Detector, if necessary, adjust the angle by gently bending the bracket for correct angle. 4 Attach the detector to the bracket and check the angle. 5 Plug power cord int the cigarette lighter then to the detector. 2 Be sure all power Reinsert plug Power connection Is secure.
DASHBOARD MOUNTING 1 To place the detector on the dashboard, find a location where the unit has a clear level view of the road. The Angie cannot be adjusted after mounting. 2 Remove paper backing from one side of the Velcro fastener. 3 Attach the pad to the dashboard at your chosen location and remove the other paper backing. 4 Attach the detector to the Velcro fastener, You can remove and reattach the unit as often as you like. 5 Plug power cord Into cigarette lighter then to the detector.