Specifications

20 Technical Support: 877-995-8155
ADDITIONAL INFORMATION AND ACCESSORIES
ADD AN OPTIONAL RADIO DIGITAL KEYPAD:
For more convenience you may add an optional
Radio Digital Keypad available from BFT. No wiring
is necessary and it will be programmed as your
Mitto 2 remote control. It will give you 100 separate
programmable entry codes and can operate up to 10
different systems. Ask your installer for further details.
T-Box Ref. # P121019
ADD AN OPTIONAL BATTERY BACK-UP:
In an unlikely event of power failure, you may easily add
a battery back-up to your Phobos BT Gate System. Ask
your installer for further details. BT-BAT
Ref. # P125005
EMERGENCY RELEASE OF OPERATOR:
In case of power failure (if the system is not connected
to an optional battery back-up) the system can be
released with the provided CLS key as shown in the
drawing on the right. You may now operate the gate by
pushing it or pulling it manually in a slow motion.
CLS Ref. # D610180
NOTE: Remember to re-engage the locking device after
power resumes.
UL RESET PROCEDURE:
For safety reason, it is a UL 325 requirement to freeze the automation in case the gate
is obstructed twice in a row. In order to reset the system and have the automation
functional again, the main power needs to be shut off and switched on again. It may be
done at the circuit breaker if the installation has one. If the system is equipped with a
battery back-up, the battery needs to be disconnected prior to the power being reset.
Note: Please reconnect the battery once the system is functional again.