Specifications

Technical Support: 877-995-8155 19
ADDITIONAL INFORMATION AND ACCESSORIES
REMOTE CONTROL REPLACEMENT BATTERY:
Batterytype23AE12volts(size:11/8”lengthx3/8”
diameter). Available at: Radio Shack, Walgreens, auto
parts store, electronics store, on the Web, etc…
REPLACEMENT FUSES FOR LIBRA BOARD:
Board’sfuse1.25AMP(1/4”diameterx1.25”long)
Line’sfuse2AMP(1/4”diameterx1.25”long)
Available at: Radio Shack, auto parts store, electronics
store, on the web, etc…
HOMELINK COMPATIBILITY:
BFT Integrated radio receivers operate with a frequency of 433 Mhz. HomeLink is compatible
with radio-frequency devices operating between 288 and 399 MHz (exclusive of the restricted
322-335 MHz range). Select 2007 and newer vehicles are compatible up to 433 MHz (exclusive
of the restricted 400-410 MHz range). If your vehicle is equipped with a new 433MHz
transmitter, please log on to www.bft-usa.com and go to Downloads to find the procedure to
follow.
If your vehicle is not compatible with 433MHz, the following items need to be ordered and
installed by your installer:
Receiver: Ref. # 109950
Transmitter (for programming only): Ref. # MSC308911
ADDING TRANSMITTERS TO THE RECEIVER
1. Turn on the display (by pressing twice the “OK” button).
2.Scrolldown(“-”button)to“RADIO” menu and press “OK”.
3. The display will show “ADD START”. Press “OK”
4. The display will show “HIDDEN BUTTON”. Press the two front
buttons of the transmitter at the same time as shown on Fig. A.
Note: Older models will have the hidden button on the back side of
the transmitter as shown on Fig. C.
5. The display will show “DESIRED BUTTON”. Press the button you
want to activate the gate with as shown on Fig. B.
6. The display will show “ADD START” . Repeat the programming
procedure from step #3 to install other transmitters.
7. Switch off the display by pressing “+” and “-” buttons at the
same time twice.
Mitto 2 Ref: # D111837
Fig. A
Fig. B
Fig. C