Specifications

16 Technical Support: 877-995-8155
MENU FLOW CHART
AUTOSET
It automatically sets the motor torque (Motor 1 torque, Motor 2 torque, Motor 1 slow down torque, Motor 2 slow down torque).
Note: If slow down is disabled or not reached slow down torque will not be set. After slow down adjustment Autoset has to be carried out gain.
WARNING!: obstruction detection is disabled during Autoset. Be sure that no obstacle is within the working range of the gate
while Autoset is being performed.
RADIO MENU
ADD START
(Program a button of a remote
to activate the gate)
ADD 2CH
(No eect)
READ
(Check if a remote is in the memory of
the receiver and display button #)
EX:
02 t1 (remote #2, button #1)
ko (remote not in the memory)
ERASE 64
WARNING!
Removes all remote devices
from the receiver memory.
COD RX
Displays the receiver code
(required only if cloning remotes
is needed)