Owners manual

14
TIRE ROTATION AND REPLACEMENT
To obtain maximum tire wear, it may be necessary to rotate your tires. Refer
to your vehicle owner’s manual for instructions on tire rotation. If you do
not have an owner‘s manual for your vehicle, BFGoodrich
®
recommends
rotating your tires every 6,000 to 8,000 miles (10,000 to 12,000 km), or
as specified by your vehicle manufacturer, whichever is lower. Monthly
inspection for tire wear is recommended. Your tires should be rotated at
the first sign of irregular wear, even if it occurs before 6,000 miles (10,000
km). This is true for all vehicles. When rotating tires with a directional
tread pattern, observe the arrows molded on the sidewall which show the
direction the tire should turn. Care must be taken to maintain the proper
turning direction. Some Tire Pressure Monitoring Systems (TPMS) may
not recognize that a tire has been moved to a different position
on your vehicle. Make certain that your TPMS system is reset, if
necessary, so as to correctly identify the location of each tire on
your vehicle. Refer to your vehicle owner’s manual or your vehicle
dealer. Determine whether rotated tires require tire inflation adjustment
as front and rear position tire pressure may vary according to the vehicle
manufacturer’s specification due to the actual load on that wheel position.
Some vehicles may have different sized tires mounted on the front and rear
axles, and these different sized tires have rotation restrictions. Always check
the vehicle owner’s manual for the proper rotation recommendations.
Full-size Spare
Full-size spare tires (not temporary spares) of the same size and construction
should be used in a five (5) tire rotation. Always check the inflation pressure
of the full-size spare immediately before incorporating it into rotation.
Follow the vehicle manufacturer’s recommended pattern for rotation, or if
not available, see a qualified tire technician.
Replacement of Two (2) Tires
It is recommended that all four (4) tires are replaced at the same time.
However, when only two tires are replaced, the new ones should be put
on the rear. The new tires, with deeper tread, may provide better grip and
water evacuation in wet driving conditions.
CUSTOMIZATION OF TIRES, WHEELS, OR SUSPENSION
ON SUVS AND LIGHT TRUCKS
Due to their size, weight and higher center of gravity, vehicles such as
SUVs and light trucks do not have the same handling characteristics as
automobiles. Because of these different characteristics, failure to operate
your SUV/truck in a proper and safe manner can increase the likelihood of
vehicle rollover. Modifications to your SUV/truck tire size, tire type, wheels
or suspension can change its handling characteristics and further increase
the likelihood of vehicle rollover. Whether your SUV/truck has the original
equipment configuration for tires, wheels and suspension or whether any
of these items have been modified, always drive safely, avoid sudden, sharp
turns or lane changes and obey all traffic laws. Failure to do so may result
in loss of vehicle control leading to an accident and serious injury or death.
35297_Text.indd 14 5/17/12 11:41 AM