Datasheet

GRAPHICS CARD FULL INSTALL MANUAL

Version 2.0 INT

HDTV Out & S-Video Out (9-Pin)

1. Connect the included HDTV dongle to the graphics card.

2. Connect a composite, component or RCA video cable to the appropriate HDTV dongle con-

nector and to the display you wish to output an image to.

HDTV Out & S-Video-In/Out (10-Pin)

1. Connect the included HDTV dongle to the graphics card.

2. Connect a composite, component or RCA video cable to the appropriate HDTV dongle con-

nector and to the display you wish to output an image to.

Step 3. Power on the computer and wait until Windows loads.

Step 4. After the “Multi-Display Setup Wizard” automatically launches, follow the step-by-

step setup instructions to take full advantage of nView’s multi-display environment. If the wizard

does not automatically launch, proceed to the next step.

Step 5A. In Windows 2000 or XP, click “Start” > “Control Panel”.

Step 5B. In Windows 98 or ME, click “Start” > “Settings” > “Control Panel”.

Step 6. Double click “NVIDIA nView Desktop Manager”

Step 7. Click “Enable” under “nView Desktop Manager”. This will enable nView and add

“nView Properties” to the pop-up menu when you right click on the desktop.

Step 8. Click “Setup Wizard” under “nView Desktop Manager wizard” and follow the

step-by-step setup instructions to take full advantage of nView’s multi-display environment.

You have successfully completed the HDTV/Video-Out setup process.

VI. Setting up Video-In

Step 1. Connect a broadcasting device such as a TV, VCR or gaming console to your graphics

card. Refer to your graphics card box to determine your connectivity type and then follow the

appropriate connection steps below.

S-Video In/Out (9-Pin)

1. Connect the included VIVO dongle to the graphics card.

2. Connect a composite or RCA video cable to the appropriate VIVO dongle connector labeled

“in” and to the broadcasting device you wish to input an image from.