Datasheet

EN
GRAPHICS CARD FULL INSTALL MANUAL
7
Version 2.0 INT
Microsoft Windows NT 4.0 with Server Pack 5 or 6
1. A user with Windows NT Administrator privileges must install these drivers. Please consult
your IT dept. or Microsoft Windows documentation.
2. After booting up and logging in, insert the BFG driver CD.
3. Click “Start” then “Settings” and “Control Panel”.
4. Double-click the Display icon, click on the Settings tab then “Display Type” and
“Change”.
5. Select “Have disk” then browse.
6. Navigate to the CD/DVD-ROM containing your BFG driver CD.
7. Open the “Win_NT4” folder and Click “OK”.
8. Windows will ask you if it is ok to proceed with the installation of a third party driver.
Click “Yes”.
9. Click “OK” then “Close” and “Close”.
10. When prompted to restart the system click “Yes”.
11. The system will restart.
You have successfully completed the driver installation process.
V. Setting up nView and HDTV or Video-Out
Step 1. Power off your computer.
Step 2. Connect an additional display such as another monitor or TV to your graphics card.
Refer to your graphics card box to determine your connectivity type and then follow the appro-
priate connection steps below.
S-Video Out (4-Pin)
1. Connect an RCA video cable to the graphics card and to the display you wish to output an
image to.
S-Video In/Out (9-Pin)
1. Connect the included VIVO dongle to the graphics card.
2. Connect a composite or RCA video cable to the appropriate VIVO dongle connector labeled
“out” and to the display you wish to output an image to.