Datasheet

EN
GRAPHICS CARD FULL INSTALL MANUAL
6
Version 2.0 INT
9. Under “Search for the best driver in these locations” un-check “Search removable
media” and check “Include this location in the search”.
10. Click “Browse” then the “+” sign next to my computer. Then click the “+” sign next to
the CD/DVD-ROM drive that contains the BFG driver CD.
11. Click the “+” sign next to the folder titled “Win_XP_2000” and then select the “inf” file.
12. Click “Ok” and then “Next”.
13. If prompted to restart, click “Yes”.
You have successfully completed the driver installation process.
Microsoft Windows 98 or ME
1. When first booting up Windows might show the “Add New Hardware Wizard” after
detecting the new hardware
2. Click “Next” when the wizard reports finding a “Standard PCI Graphics Adapter”, (this
device is correct for both PCI and AGP cards), then “Search for best driver” and “Next”.
3. In Windows 98 ONLY – Uncheck all search location buttons on the “Search for new driv-
ers” window, then click “Next”. Allow Windows to use the “Standard PCI Graphics
Adapter”.
4. Click “Finish” and “Yes” when promoted to restart your system.
5. Right click on “My Computer” and select “Properties”, then the “Device Manager”
tab.
6. Click to the “+” sign next to “Display Adapter” then double click the device listed (should
be “Standard PCI Graphics Adapter”).
7. In the General Tab click “Update Driver” then “Next”.
8. Choose “Display a list of all if the drivers in a specific location…” then
click “Next”.
9. Click “Have Disk” then click “Browse”.
10. Navigate to the CD/DVD-ROM drive containing your BFG driver CD, and find the folder,
‘Win98_ME’.
11. Open the “inf” file and then click “OK”.
12. Make sure that your newly installed card is highlighted and click “Next”.
13. After the files have been installed click “Finish”, then “Apply”, and finally “Restart”.
You have successfully completed the driver installation process.