Datasheet

GRAPHICS CARD FULL INSTALL MANUAL

Version 2.0 INT

Microsoft Windows 98 or ME

1. Click on “Start” > “Settings” > “Control Panel” and then double click on “System”.

2. Click on the “+” by the “Display Adapter”

3. Double click on the video card under “Display Adapter” and place a check in the box to

disable in hardware profile.

4. Close “Device Manager”. Click “No” if prompted to restart your system

5. Double click the display icon in “Control Panel”.

6. In “Display Properties” click “Settings” > “Advanced” (this button may vary depending

upon the current display drivers and operating system).

7. In the “Adapter” tab (again this may vary depending upon the type of video or drivers

installed on the computer) click “Change” to select a new display adapter.

8. List the “Display Devices”, DO NOT search or auto-detect the display adapter. If you do not

see a listing of various computer video card manufacturers and models select “Show all

hardware”. In the listing select Standard display types (generally the first listing under

manufacturers) and choose standard VGA for the model and follow the on-screen instruc-

tions. Do not restart after the installation has finished.

9. Close all open windows and shut down your system. Your system is now prepared for the

installation of your new BFG graphics card.

II. Installing the Graphics Card

Important! Have your system, case and motherboard documentation ready should you need to

refer to it.

Step 2. Power off both the computer and monitor.

Step 3. Unplug the power cord and monitor from the back of the computer.

Step 4. Remove the computer’s side panel or cover.

Step 5. Identify the slot on the motherboard that matches the type of BFG Tech graphics card

you purchased.

PCI

AGP

PCI EXPRESS