User's Manual

Wireless Mini Analyser User Manual
Wireless Mini Analyser User Manual V1_06
1_04
28 of 32
RD096 071112
9 Wireless Analyser Module Specifications
9.1 General
Parameter
Units
Conditions
Min
Typ
Max
Supply Voltage
V
Power supplied to module via Pin 9 on the 9-Way D
Connector or by the Mini USB connector
5
Supply Current
mA
50
9.2 Communications
Parameter
Units
Conditions
Min
Typ
Max
Data Rate
kbaud
19.2
Protocol
2.4GHz IEEE802.15.4 Compatible
Communications Range
m
50
Transmit Power Level
dBm
2.5
Receiver Sensitivity
dBm
-96
9.3 Environmental
Parameter
Units
Conditions
Min
Typ
Max
Operating Temperature Range
°C
-20
70
Lead-Free and RoHS compliant
Compliant with FCC part 15 rules, IC Canada, ETSI ETS 300-328 and Japan ARIB STD T66
FCC ID: TYOJN5139M0
IC: 7438A-CYO5139M0
These modules have been designed to operate with antennas having a maximum gain of 4.4 dBi. Antennas
having a gain greater than 4.4 dBi are strictly prohibited for use with this device. The required antenna
impedance is 50 ohms.
As long as the above condition is met, further transmitter testing will not be required.