User's Manual

Wireless Mini Analyser User Manual
Wireless Mini Analyser User Manual V1_06
1_04
22 of 32
RD096 071112
6.3.3 Beep / LED 2
The <Beep / LED 2> selection page allows the user to configure the indicators for LF transmissions by the Mini
Analyser. The <Beep / LED 2> selection page is entered by pressing the power button at the <Setup – Beep / LED
2> menu page.
RF Rx Live: Selects indication mode for general RF reception, options are:
Off – No indication
Beep – Audible indication
LED – Visual indication
Beep/LED – Both
RF Rx Trig: Selects indication mode for LF triggered RF reception, options are:
Default – Indication as per RF Rx Live
Beep – Audible indication
LED – Visual indication
Beep/LED – Both
RF Rx Move: Selects indication mode for moving sensor RF reception, options are:
Default – Indication as per RF Rx Live
Beep – Audible indication
LED – Visual indication
Beep/LED – Both
Within the <Beep / LED 2> selection page the field to be changed is selected using the Left Arrow / Right Arrow
navigation keys. With the required menu item highlighted by the square brackets […] pressing the power button
cycles through the available options.
The <Beep / LED 2> selection page is exited by pressing and holding the Left Arrow navigation key. This returns the
user to the <Setup – Beep / LED 2> menu page.
Setup
Beep / LED 2
Up Ok Down
[RF Rx Live: Beep / LED]
RF Rx Trig: Default
RF Rx Move: Default
Prev Toggle Next