Manualshelf

User's Manual

ManualsBrandsbf1systems ManualsAutomotiveWireless device for receiving and decoding RF data from TPMS sensors
21222324252627282930
Wireless Mini Analyser User Manual
Wireless Mini Analyser User Manual V1_06
1_04
21 of 32
RD096 071112
6.3.1 Power Settings
The <Power Settings> selection page allows the user to configure the automatic power controls for the Mini
Analyser. The <Power Settings> selection page is entered by pressing the power button at the <Setup – Power
Settings> menu page.
Auto Pwr: The Mini Analyser will power off if no buttons are pressed or no serial data is received for greater
than this time
Auto BL: If enabled the Mini Analyser display backlight will be turned off if no buttons are pressed or no serial
data is received for greatert hat this time
Within the <Power Settings> selection page the field to be changed is selected using the Left Arrow / Right Arrow
navigation keys. With the required menu item highlighted by the square brackets […] pressing the power button
cycles through the available options.
The <Power Settings> selection page is exited by pressing and holding the Left Arrow navigation key. This returns
the user to the <Setup – Power Settings> menu page.
6.3.2 Beep / LED 1
The <Beep / LED 1> selection page allows the user to configure the indicators for LF transmissions by the Mini
Analyser. The <Beep / LED 1> selection page is entered by pressing the power button at the <Setup – Beep / LED
1> menu page.
LF Tx: Selects indication mode for LF transmissions, options are:
Off – No indication
Beep – Audible indication
LED – Visual indication
Beep/LED – Both
Keypad: Enables / disables keypad click
Within the <Beep / LED 1> selection page the field to be changed is selected using the Left Arrow / Right Arrow
navigation keys. With the required menu item highlighted by the square brackets […] pressing the power button
cycles through the available options.
The <Beep / LED 1> selection page is exited by pressing and holding the Left Arrow navigation key. This returns the
user to the <Setup – Beep / LED 1> menu page.
Setup
Power Settings
Up Ok Down
[Auto Pwr :10mins]
Auto BL :1min
Prev Toggle Next
Setup
Beep / LED 1
Up Ok Down
[LF Tx : Beep / LED]
Keypad : Click
Prev Toggle Next