User's Manual

Wireless Mini Analyser User Manual
Wireless Mini Analyser User Manual V1_06
1_04
13 of 32
RD096 071112
5.6 Wireless Modules
5.6.1 Wireless Module
The Wireless Module is fitted with a 9-way D-type, which connects directly to the 9-way D-type fitted to the bottom of
the Mini Analyser. When connected in this way the Wireless Module is powered directly from the Mini Analyser.
In order to make changes to the internal settings of the device the unit must be connected to the serial port of a PC
using a standard null modem serial cable (not supplied). When changing the internal settings the Wireless module
unit must be powered via the micro-USB connector on the side of the module. NOTE: The USB connector is solely
for the provision of power to the unit; no USB communication is supported.
USB Connector
Programming /
Configuration switch
2.5mm charge socket
Red Power LED
Orange wireless link LED