User's Manual
bf1systems IRTPTMS V3 System Description
bf1systems IRTPTMS V3 System Description V1_01
1_01
Page 14 of 15
RD096 110124
Ground current
< 230 mA @ 12V
7.4.5 Frequency
Frequency
125 kHz +/-5 kHz @ -40°C to +105°C
(In condition installed in vehicle)
Field strength
< 21 dBV/m @ 3m, 16V
Duration of transmission
< 10 s
Keying ratio
< 0.1
Field orientation
Field of a magnetic dipole, symmetrical axis transverse to the
housing
7.4.6 Modulation
Modulation
Duration of impulse
Baud rate
< 0.5 kBaud
Report
See specification for the corresponding WE
7.4.7 Physical link
Data interface
LIN specification Rev. 1.1
7.4.8 Protocol
Data report
LIN specification Rev. 1.1
LIN_SPDPS.doc
LIN_Master.doc
LIN_Slave.doc
7.4.9 Diagnostics
Current monitor in the antenna circuit
V
M
> 0.5 V (in the transmission impulse)
Diagnostics response
Set diagnostics status (see LIN_Slave.doc)
7.4.10 Connector
Type
Mini-timer, 4-pole
Pin 1
LIN_GND
Pin 2
LIN_V1 (Voltage supply)
Pin 3
LIN_DATA
Pin 4
SCREEN_GND
7.4.11 Environmental qualification
3533 41 202 001 C
7.4.12 Schematic representation of the trigger transmitters