Specifications

Introduction
6
2. Front Panel
2-1. Touch Buttons
If you tap any of 8 buttons, the touch buttons are enabled. The
backlights of the 8 buttons will light up indicating that they are ready to
use. If you tap any button while the backlights are on, the light behind
that button blinks 4 times indicating that it has received your input.
Touch Buttons (x8)
(Menu, Ch -, Ch +, Vol -, Vol +, OK, Stop/Eject, Standby)
DVD Loader Slot Door
(SD/MMC/Memory Stick, CF Card, USB)
Side Panel (2EA)
NOTE
 Tap the STANDBY button twice to turn the DP-S1 off without the RCU
(Remote Control Unit).
 For cleaning only wipe the DP-S1 with a cotton flannel while it is
turned off and the power cord is unplugged as the touch buttons will
respond to contact during cleaning.
2-2. Slot Door
A slot door is placed on the right side of the front panel. If you open
the door, you will find the following ports;
 USB: you can connect a USB storage device which is compatible with
the USB standard specification.
 CF Card: you can connect a CF-type memory card.
 SD/MMC/Memory Stick: you can connect either SD-type or MMC-type
memory card. You can also connect a Memory Stick.
2-3. Front Display Window
The front display gives you an easy way to check the status of your DP-
S1.