User manual

Quick Setup
24
2. Configuration
2-1. Time Setting
Please set the current date and time. The date and time information will
be the reference for the timer recording. Therefore, you have to
configure the time and date information precisely. You can also select
preferred date and time formats. The following picture illustrates the
items which you configure to set the time and date.
z Mode: You can select how to set the date and time. Please press the
OK button then you get a pop-up menu. You can choose one with the
UP/DOWN buttons and select it with the OK button.
z Date Format: Please select a display format for the date either
“DD/MM/YYYY”, “MM/DD/YYYY” or “YYYY/MM/DD” on a pop-up menu.
(DD-day, MM-month, YYYY-year)
z Time Format: Please select how to display the time: either a 12-hour
format or a 24-hour format. You will get a pop-up menu if you press
the
OK button.
z Time Offset: Time offset means the difference between GMT and your
local time zone. Under the “AUTO” mode, you don’t need to set the
time offset because the DP-P2 will set this automatically by the region
and the status of daylight-saving.
z Current Time: Under the “AUTO” mode, current date and time will be
displayed and you can not change it.
z Daylight Saving: You can enable or disable the daylight saving and
change the time-offset.
z Region: Please select your region of living to set the time-offset
properly.