User manual

Introduction
6
4. Remote Control
4-1. Operating DP-P2
In order to operate the DP-P2 with the enclosed remote control, please
select
STB mode by pressing the STB button. The red backlight
beneath the
STB button lights when you press a button in this mode.
The below picture and right table show the function of each button on
the remote control.
1 STANDBY Switch the DP-P2 between Operation and Standby mode.
2 AV bypass
Change the Composite, S-Video and Analog Audio outputs
to
the AV bypass mode
3 STB Set Remote Control to Work for the DP-P2.
4
T
V/RADIO Change to TV mode or Radio mode.
5
T
V-OUT Change Video Output. (Refer to page 17. for more information)
6
T
V Control standard TVs with remote control.
7 SETUP Go to SETUP Menu.
8 WizTV Go to Internet Service. (for future use)
9 LIVE Go to Live TV.
10 File PLAY Go to File Play.
11 VOL +/- Adjust the volume. (Increase/Decrease)
12 CH +/- Change TV or Radio Service.
13 MUTE Enable or disable the Audio output.
14 INFO Show service information.
15 FAV Show Favorite Service List.
16 GUIDE Show EPG (Electronic Program Guide).
17 POP-UP Show advanced menus of the current mode.
18 LIST Show Service List.
19 EXIT Return to the previous menu or Cancel.
20
UP/DOWN/LEFT/
RIGHT
Move the indicator on the menu mode.
21 OK Select an item on the menu or Confirm.
22 RECALL Recall the previously viewed (or listened) service.
23 RED Optional function key
24 GREEN Optional function key
25 YELLOW Optional function key
26 BLUE Optional function key
27 0~9 Numeric buttons.
28 SLEEP Set sleep time of the DP-P2.
29 ZOOM Zoom-in or Zoom-out.
30 PLAY Play Content.
31 STOP Stop playback.
32 PAUSE Pause playback.
33 SLOW FWD Slow Forward.
34 REW Rewind.
35 FF Fast Forward.
36 PREV Go to the previous track or file, and continue playing.
37 NEXT Go to the next track or file, and continue playing.
38 REC Start recording.
39 SUBTITLE Change Subtitle language.
40
T
ELETEXT Show Teletext.
41 SOUNDTRACK Change Soundtrack language.