User manual

Introduction
4
2. Front Panel
2-1. Buttons
Five buttons are placed on the front panel.
z STANDBY Button: it switches the DP-P2 between the operation and
standby modes.
z CHANNEL Buttons: the top and bottom parts of the circular button
work as the channel-up and channel-down buttons.
z VOLUME Buttons: the left and right parts of the circular button work
as the volume-down and volume-up buttons.
Standby Button
Channel, Volume Buttons
Front Display Window Slot Door
Front Panel
(USB, CF Card, SD/MMC/Memory Stick)
2-2. Slot Door
A slot door is placed on the right side of the front panel. If you open this
door, you can find the following ports;
z USB: you can connect a USB storage device which is compatible to
the USB standard specification.
z CF Card: you can connect a CF-type memory card.
z SD/MMC/Memory Stick: you can connect either SD-type or MMC-type
memory card. You can also connect a Memory Stick.
2-3. Front Display Window
The front display window gives you easy way to check the status of the
DP-P2.