User guide

STB & PVR Function

1-3.

Volume Level Adjust

Use the

VOL+/VOL-

buttons respectively to increase or decrease the

level of the analogue and the digital audio outputs. The

MUTE

button

will turn off both the analogue and digital audio outputs. You can

cancel the mute function by pressing the

MUTE

button a second time,

or by pressing either of the

VOL+/VOL-

buttons.

NOTE



You can not control the volume level of the digital audio outputs if you

set the audio format as “pass-through”. Therefore you have to use

the remote control of an audio decoder (such as an amplifier) to

adjust the volume level if you are using digital audio out.

1-4.

Soundtrack Change

If the current TV program provides more than one language or audio

format (e.g. MPEG audio and Dolby audio together), you can change the

setting while you continue to watch the program. Press the

SOUNDTRACK

button to show a list of the languages and audio

formats available. Use the

UP/DOWN

buttons to select your desired

setting and then press

to change it. To hide the list, press the

SOUNDTRACK

button a second time, or press

EXIT