User guide

Quick Setup
35
2) Set as WizPNP Client
Setting the DP-P2 as a WizPNP server allows access from another
beyonwiz product which has been enabled as a WizPNP client, so the
client can play files in the DP-P2. It also allows your PC to access the
DP-P2 in order to transfer files.
To set the DP-P2 as a WizPNP server, select “Enable” in the “Server”
menu. The following settings are available for configuring;
 Name: This name is used to identify the WizPNP server. The default
name is “beyonwiz”. To change the server name, press the
OK
button and use the “Keyboard Input” pop-up window to enter your
desired name.
 Port: This is 5-digit number, which has maximum value as 65534.
The default number is 49152. You should not change this number
unless you experience difficulty with the WizPNP server function.
You can disable the WizPNP server function by selecting “Disable” in the
“Server” menu.
NOTE
 For your PC to connect to the DP-P21 you will require a software
application “WizFX” to be installed on your PC. Visit the beyonwiz
website (www.beyonwiz.com.au) to download the “WizFX” software
application and user instructions.