User guide

Quick Setup
29
2-4. A/V Input
The DP-P2 can receive either Composite or S-Video signals from a
external A/V device. You need to configure the A/V input ports to suit
the connected external A/V device as follows;
 A/V Input: You can enable or disable the A/V input ports. When the
A/V input is enabled, a new service named with “950 A/V Input” will
appear in the service list. You can watch and enable the PVR
functions to the external A/V signals by selecting the 950 service.
 Display: Select either of the following options;
 Full: Displays incoming video signal as 16:9 aspect ratio.
 Centre: Displays incoming video signal as 4:3 aspect ratio.
 Input: Select either Composite or S-VIDEO to suit the connection of
the external A/V device connected to Input.
 Video Type: Select either PAL or NTSC to suit the video output of the
external A/V device connected to Input.