User guide

Quick Setup

2) Audio Outputs

The DP-P2 supports Dolby Digital decoding so that it can decode and

output the Dolby sound through the RCA connectors. It also supports

digital outputs with optical and coaxial ports.



Audio Format: The DP-P2 has 2ch analog audio outputs for a stereo

speaker system. But it can transmit audio signal up to 5.1ch through

digital audio outputs if the content has 5.1ch audio source. If you

only have a stereo speaker system, you have to set the audio format

as 2ch. In this case the DP-P2 down mixes the 5.1ch audio signals to

a stereo audio signal. If you connect a 5.1ch speaker system to the

DP-P2 through the digital audio outputs, please choose 5.1ch for the

best performance. In order to decode an audio source with an

external audio decoder system, set the audio format as pass-through.



S/PDIF Output: Enables the digital audio output through the coaxial

and optical ports.

3) Colour Setting

You can adjust the colour output of the DP-P2.

The three options are brightness, contrast and saturation. Use the

UP/DOWN

buttons to select each option, and adjust the setting with

the

LEFT/RIGHT

buttons. You can restore all colour settings to the

factory default values by pressing the

RED

button. To apply your

chosen settings, use the

UP/DOWN

buttons to select “Accept” and

press

. To cancel the new settings, select “Cancel” and press

, or

press the

EXIT

button.