User Manual BEYONICS XRT270 Remote Control Rev A Date: 06.06.
Revision History Sect.
Overview/ Purpose: To help user quickly get started with Beyonics’s XRT270 Remote Control Unit (RCU). Package inclusions: In this packaging: XRT270 Remote control built by Beyonics. Not Included: 2x AAA alkaline batteries, VIZIO SmartCast TV. Steps: 1. Insert 2x AAA alkaline batteries into RCU. 2. Check RED LED blinks. (The status LED will flash until pair successfully) 3. Test keys’ IR functionality with VIZIO TV by press keys ONE by ONE. All keys will be response following below table.
Figure 1 Relaunch Pairing 5. pair RCU with VIZIO TV, follow below steps to setup. Go to TV setting: -> Voice Remote->Unpair Remote, unpair previous RCU. =>Pair New Remote , then TV will searching RCU.
Once pair successfully, the screen will shown next page. 6. BLE-HID key functional Test: All 22 keys are available at BT mode on VIZIO TV. Bluetooth 2400MHz ~ 2483.5MHz Power 2.19mW PCB Antenna Gain 1.
Notes： This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
