Application Guide

FAQ / Frequently Asked Questions:

What are the requirements for the cable assembly?

Beyondtech’s 10G SFP+ DAC Cables meet the signal integrity requirements deﬁned by the MSA

SFF-8431 industry standard. We could also design and build customized solutions to meet the

requirements of a customer’s special requirements.

What wire gauge is required?

Beyondtech oﬀers SFP+ cable assemblies in wire gauges #30 to support our customers’ speciﬁc cable

requirements.

What cable lengths are required?

Cable length and wire gauge are related to the performance characteristics of the cable assembly.

Longer cable lengths require heavier wire gauge, while shorter cable lengths can utilize a smaller gauge

cable.

Could you build custom solutions?

Yes, Beyondtech can design and build custom solutions for our customers. Please contact us and

describe your special requirements and our Production Department will do their best to meet your

needs.

Troubleshooting Typical SFP+ Problems

If you are using our 10G SFP+ DAC cable with an equipment that you have previously conﬁrmed that is

compatible and the connection is not working, then you might run a quick check: plug in a diﬀerent SFP+

cable assembly between the same two ports.

If the connection is now working, it could be a problem with the ﬁrst SFP+ cable assembly. If the

connection is still not working, then it could be a problem with the conﬁguration of the ports or

incompatibility between server and switch.

Beyondtech Technical Assistance.

If you have any questions regarding the information posted on this guide, or something is not entirely

clear and you need additional support, please do not hesitate to contact us directly via email or phone

call. We will be happy to assist you.

DIRECT ATTACH CABLE

APPLICATION GUIDE