Operator`s manual

97
Display Color Selection Menu
28
28 DISPLAY COLOR SELECTION MENU: (COLOR)
COLOR Enter COLOR SELECTION MENU:
Press ‘MENU’ 1) Nine times, if Communication Option Board installed, otherwise just
eight times. Display shows "COLOR" Color Selection Menu that allows
user to select the color of the LED display for either normal mode or under
alarmed condition.
28.1 N.COLOR Enter NORMAL COLOR SUBMENU
Press ‘RESET/ENTER’ 2) Display shows "N.COLOR" Normal Color submenu that allows user to
change normal Display’s color. If necessary to access the other following
submenus: "SP1.CLR", "SP2.CLR", "AL1.CLR" or "AL2.CLR". Use or
Press ‘MENU’ button.
Press ‘RESET/ENTER’ 3) Display flashes "GREEN" Green color (default) or previous selection.
Press ‘䊱/MAX’ 4) Scroll through the available following colors: "GREEN", "REd" or
"AMbER" for your color choice of Display.
• The four following menus allow the user to change the color of display
when setpoint is reached or alarm is triggered.
28.2 SP1.CLR Enter SETPOINT 1 COLOR SUBMENU
Press ‘RESET/ENTER’ 5)
Display shows "StOREd" stored momentarily and advances to "SP1.CLR"
Setpoint 1 Color submenu.
Press ‘RESET/ENTER’ 6) Display flashes "HOLd" Hold option (default), which causes the display
color remains the same as the setpoint reached, or previous selection.
Press ‘䊱/MAX’ 7) Scroll and select the following available options: "HOLd", "GREEN",
"REd" or "AMbER" for your choice of display color.
28.3 SP2.CLR Enter SEPOINT 2 COLOR SUBMENU
Press ‘RESET/ENTER’ 8) Display shows "StOREd" stored momentarily and advances to "SP2.CLR"
Setpoint 2 Color submenu.
• The menu items and configuration steps of following submenus:
"SP2.CLR" Setpoint 2 Color submenu
28.4 AL1.CLR Enter ALARM 1 COLOR SUBMENU "AL1.CLR"
28.5 AL2.CLR Enter ALARM 2 COLOR SUBMENU "AL2.CLR"
"AL1.CLR" and "AL2.CLR" are identical to the above "SP1.CLR" Setpoint 1
Color submenu steps. Therefore refer it as the example for setting Display
Color Functions.