Specification


[phone] • www.BeyondLEDTechnology.com

7
LED CENTER BASKET TROFFERS
KENORA
TM
PANEL / TROFFER
Cable Suspended Mounting
Figure 1
Figure 2
flange
cable A
gripper
cable B
wire rope lock
flexible metallic conduit
anchors
self-tapping screw
top ceilling
Installation Steps:
Step 1: Pull the sleeve on the end of cable A through the provided ange and make sure the end cap positioned
in the ange. Fix the anges onto the ceiling with the seif-tapping screws.
Step 2: Insert the end of cable A into the wire rope gripper attached on the cable B, then adjust the cable A to be
desired height by pressing the wire rope lock and adjust the cable B to the desired angle.
Step 3: Hook the luminaire up to the swivel lobster clasp attached to the two ends of cable B and make a nal
adjustments.
Step 4: Connect LED driver to AC mains power.