Specification


(866) 786-1117 • www.BeyondLEDTechnology.com

5
LED CENTER BASKET TROFFERS
KENORA
TM
PANEL / TROFFER
WARNING
WARNING
CAUTION
To reduce the risk of death, personal injury or property damage from re, electric shock, falling parts,
cuts/abrasions and other hazards read all warnings and instructions included with and on the xture box and all
xture labels.
Before installing, servicing, or performing routine maintenance upon this equipment, follow these general
precautions.
Commercial installation, service and maintenance of luminaires should be performed by a qualied licensed
electrician.
For the installation: If you are unsure about the installation or maintenance of the luminaires, consult a qualied
licensed electrician and check your local electrical code.
To prevent wiring damage or abrasion, do not expose wiring to edges of sheet metal or other sharp objects.
Do not make or alter any open holes in an enclosure of wiring or electrical components during kit installation.
Turn o electrical power at fuse or circuit breaker box before wiring xture to the power supply.
Turn o the power when you perform any maintenance.
Verify that supply voltage is correct by comparing it with the luminaire label information.
All wiring connections should be capped with UL approved wire connectors.
Avoid direct eye exposure to the light source while it is on.
Account for small parts and destroy packing material, as these may be hazardous to children.
Risk of burn. Disconnect power and allow xture to cool befor changing bulb or handling xture.
NOTICE: Green ground screw provided in proper location.Do not relocate.
NOTICE: Minimum 90° supply conductors.
NOTICE: Specications and dimensions subject to change without notice.
NOTICE: Suitable for Dry or Damp location, Type IC
LED DRIVER
General Wiring Diagram
Black(Live)
120-277V
White(Neutral
)
Green(Grd)
Purple(Dim+)
Pink(Dim-)
Gray(-)
White(+)
Dimming wire
to 0-10v IEC
compliant control
Lead wire to
LED load