Specification


Step 4: Connect the light cable
to the power input cable.
Step 5: Screw and fasten the light on the
bracket with screws on both sides of the
lights.
Step 6: Screw and fasten the PC frame back to the light
with one screw on the top and two screws at the bottom.
Black
White
Green Ground
Neutral
Line
Installation Method B
Step 1: Remove the 3 screws on the PC
frame, one on the top and the other two at
the bottom, then take out the PC frame.
Step 3: Screw and fasten the light to the wall
with 4 KA5X12 screws on the 4 corners of the
light.
Step 4: Screw and fasten the PC frame back to the light
with one screw on the top and two screws at the bottom.
Step 2: Connect the light cable to the power
input cable.
3000K
4000K
5000K
12W
14W
16W
Attention: The screw hole on top
of the light is mounted facing to
front part of the light.
[phone] • www.BeyondLEDTechnology.com

8
BEYOND
L E D T E C H N O L O G Y
LED WALL SCONCE
ALTUS
TM
LED WALL SCONCE