Specification
(866) 786-1117 • www.BeyondLEDTechnology.com
8
BEYOND
L E D T E C H N O L O G Y
LED WALL PACK
TM
ZION
2nd Gen
Installation I:
ON
OFF
1.Turn off the power.
3. Open the fixture, and remove the
upper cover of the fixture.
5. Use a screwdriver to remove the plug,
Attach the EVA cotton pad to bottom.
7. Mount the cover of the fixture.
9. Make sure the installation is
complete before turning on
the power switch.
8. Fix the fixture with screws.
4. Drill mounting holes with
an electric drill.
6. Lock the bottom shell on the mounting
seat with screws,Connect the L, N and G
wires to the power supply.
2. Use a screwdriver to remove
the screws on both sides.
ON
OFF