Specification

[phone] • www.BeyondLEDTechnology.com

9
LED FLOOD LIGHT
HILO
TM


Installation 3: Installation with Flood Mount
3.1 Flood Mount Installation (b=FM suitable for all power of this series)
Step 1: Take the lamp out of package. (figure 3.1)
Step 2: Tighten the brackets and screws.（figure 3.2）
3.2 Installation of LED lamp with flood mount (b=FM suitable for all power
of this series)
figure 3.1 figure 3.2
figure 3.3 figure 3.4
Bracket
Hexagon socket screws
Step 1: Take the lamp out of package.
Step 2: Connect the wires properly according to the right wiring requirements (pay attention to
positive wire, negative wire and ground wire), and then put the wires into lamp pole. (figure 3.3)
Step 3: Loosen the screws, adjust the lamp angles as per actual demands and then tighten the screws.
(figure 3.4)
Tips: Angles of the lamp is adjustable.
Black/Brown:ACL
White/Blue:ACN
Green/Yellow
figure 2.4
figure 2.5
Bracket
Black/Brown:ACL
White/Blue:ACN
Green/Yellow