Specification


[phone] • www.BeyondLEDTechnology.com

8
BEYOND
L E D T E C H N O L O G Y
LED FLOOD LIGHT
HILO
TM

1.2 Installation of LED lamp with adjustable fitter
（b=AM suitable for all power of this series）
Installation 2: Installation with Yoke Mount
2.1 Yoke Mount installation(b=YM suitable for all power of this series）
Step 1: Take the lamp out of package.
Step 2: Pass the wires through hole of bracket.（figure 2.1）
Step 3: Fix the lamp and bracket together with screws;(Watch out not to scratch the wire)(figure 2.2）
Step 4: Tighten the other bracket with screws.（figure 2.3）
figure 2.1 figure 2.2 figure 2.3
Step 1: Take the lamp out of package.
Step 2: Connect the wires properly according to the right wiring requirements (pay attention to
positive wire, negative wire, and ground wire) and then put the wires into lamp pole;
（figure1.4）
Step 3: Loosen the screws, adjust the lamp angles as per actual demands and then tighten the
screws.
Tips: Angles of the lamp is adjustable
(pass the bracket through mounting surface, fix it with screws, then connect the wires as
Hexagon socket screws)
pole
Bracket
figure 1.4
figure 1.5
Black/Brown:ACL
White/Blue:ACN
Green/Yellow
2.2 Installation of LED lamp with Yoke Mount(b=YM suitable for all power
of this series)
Step 1: Take the lamp out of package;
Step 2: Connect the wires properly according to the right wiring requirements (pay attention to positive
wire, negative wire, and ground wire), and then put the wires into lamp pole;(figure 2.4)
Step 3: Loosen the screws, adjust the lamp angles as per actual demands and then tighten the screws;
(figure 2.5)
Tips: Angles of the lamp is adjustable