Specification
(866) 786-1117 • www.BeyondLEDTechnology.com
7
LED FLOOD LIGHT
HILO
TM
Cautions:
Notice:
Attention:
Instruction:
The installation of this LED light with different wattage is different. Please refer to the installation
instruction correspondingly.
Wiring Diagram
Installation 1: Installation with adjustable fitter
1. To avoid possibility of electrical shock or fire, the installation personnel must have professional
electric knowledge.
2. Please wear gloves to avoid injury before installation.
3. If any smoke or spark of the wire happened, please turn off the power immediately and notify
relevant personnel.
1. Please check if there is any damage during shipping. If so, please contact manufacturer timely.
2. Please read the installation instruction carefully to check whether all the accessories are available.
After confirmation, install the fixture according to installation steps.
1.1 Adjustable fitter mounting（b=AM suitable for all power of this series）
figure 1.1 figure 1.2 figure 1.3
Step 1: Take the lamp out of package；
Step 2: Pass the wires through hardware and fix it with screws；（figure 1.1）
Step 3: Pass the wires through from the other bracket and rubber, fix it with screws.
(Watch out not to scratch the wire)；（figure 1.2）
Step 4: finished.（figure 1.3）
Black/Brown:ACL
White/Blue:ACN
Green/Yellow
1. Do not use the electric generator to test the LED lamp.
2. Please abide by related country, regional and local law and regulations when install this fixture.
3. Please turn off the power before installation or maintenance.
4. Proper grounding is required to ensure safety.