Specification
Please read this manual carefully before using the product
Application
Widely used in Indoor and outdoor • Parking lot • Stadiums • General road lighting • Residential area
• Yard park • Petrol station
Notes before Installation
1. Be careful to open the carton, contact us if any damage.
2. This product must be installed in accordance with the applicable installation, code by a
person familiar with the construction and operation of the product and the hazards involved.
3. "caution - risk of shock" and "disconnect power before servicing" when photoelectric switch
provided.
4. Please check whether the voltage marked on the luminaire is consistent with the input
voltage to be connected, so as not to damage the LED luminaire.
5. To ensure the lifetime of the product, please do not use it in a place with strong acid mist.
6. Make sure the installation position can withstand 10 times the weight of the luminaire before
installation and install it at a at place without vibration, no swing, no re hazard.
Overview Description
Installation instructions
ALWAYS TURN OFF THE POWER SUPPLY FROM MAIN CIRCUIT BREAKER FIRST!
• Type A (Slip Fitter )
1. Attach the lamp arm
to the lamp rst
2. Connect the input wire and install the lamp on the lamp post
Note: after lengthening the input wire, meet the height
requirement of the light pole and connect the wire at the bottom
of the light pole.
BLUE
TM
(866) 786-1117 • www.BeyondLEDTechnology.com
12
BEYOND
L E D T E C H N O L O G Y
LED AREA LIGHT