Installation Guide

[phone] • www.BeyondLEDTechnology.com
Due to continuous product improvement, information in this document is subject to change.
To reduce the risk of death, personal injury or property damage from fire,
electric shock, falling parts, cuts/abrasions, and other hazards read all
warnings and instructions included with and on the fixture box and all
fixture labels. Before installing, servicing, or performing routine
maintenance upon this equipment, follow these general precautions.
Commercial installation, service and maintenance of luminaires should
be performed by a qualified licensed electrician.
For the installation: If you are unsure about the installation or
maintenance of the luminaires, consult a qualified licensed electrician
and check your local electrical code. To prevent wiring damage or
abrasion, do not expose wiring to edges of sheet metal or other sharp
objects. Do not make or alter any open holes in an enclosure of wiring or
electrical components during kit installation.
WARNING: RISK OF FIRE OR ELECTRICAL SHOCK
Turn off electrical power at fuse or circuit breaker box before wiring
fixture to the power supply. Turn off the power when you perform any
maintenance. Verify that supply voltage is correct by comparing it with
the luminaire label information. Make all electrical and grounded
connections in accordance with the National Electrical Code and any
applicable local code requirements. All wiring connections should be
capped with UL approved wire connectors.
CAUTION: RISK OF INJURY
Avoid direct eye exposure to the light source while it is on.
Account for small parts and destroy packing material, as these may be
hazardous to children.
**i9 Premium Area Light has 5 Year Warranty.
************
Safety Precautions
Warranty