Specification

Beyond LED Technology | 1939 Parker Ct, Stone Mountain, GA, 30087
Due to continuous product improvement, information in this document is subject to change.
1. Be careful to open the carton, contact us if any damage.
2. This product must be installed in accordance with the applicable installation, code by a person familiar
with the construction and operation of the product and the hazards involved.
3. “caution - risk of shock” and “disconnect power before servicing” when photoelectric switch provided.
4. Please check whether the voltage marked on the luminaire is consistent with the input voltage to be
connected, so as not to damage the LED luminaire.
5. To ensure the lifetime of the product, please do not use it in a place with strong acid mist.
6. Make sure the installation position can withstand 10 times the weight of the luminaire before installation
and install it at a flat place without vibration, no swing, no fire hazard.
Caution
➢ Please turn off power before install or change assembly parts.
➢ The input voltage and lamps should be matched, after connecting the power line,
Please make sure the wiring section is insulated.
➢ No-professionals, must not install and disassemble the lamps.
Caution
Notes Before Installation
Notes for Users