Specification

8
[phone] • www.BeyondLEDTechnology.com
Due to continuous product improvement, information in this document is subject to change.
TECHNICAL DATA SHEET
ASMART LIGHT CO., LIMITED
www.asmart-light.com E-mail: [e-mail]
Notice For User
 Please turn off power before install or change assembly parts.
 The input voltage and lamps should be matched, after connecting the power line,
Please make sure the wiring section is insulated.
 No-professionals, must not install and disassemble the lamps.
Trouble Shootings
Troubles
Check points
Flickering of the light
Turn off the power and turn on again in 3 minutes. If same
phenomena occur, then call agencies
Out of working
Please check the connection
Stent
Type
Lamps Net Weight
Size
Qty/ Carton
Weight/ Carton
AM
8.78KG
840*385*155mm
1
10KG
DM
9.26KG
840*385*155mm
1
10.52KG
YM
9.3KG
840*385*155mm
1
10.56KG
A&D
9.6KG
840*385*155mm
1
10.86KG
FM
8.3KG
730*400*155MM
1
9.56KG
LED Area Light
Bear Series
LED AREA LIGHTS
Packaging
TECHNICAL DATA SHEET
ASMART LIGHT CO., LIMITED
www.asmart-light.com E-mail: [e-mail]
AM DM YM A&D FM
NAME：LED ShoeBox Light
P/N：
AST-S-GB-240WXYZA1-abcdefg
Note：
The letter “X” can be any alphabet to represent manufacturer of LED, A means LUMILEDS ,C means Seoul ;
The letter “Y” can be“50” or “30” to represent LED size.
The letter"Z" can be "T1" to "T9" and suffix blank or "A" to "Z" to represent different Diffuser light angle type employed,
eg. it can be T4 o
r T4L or T4M;
The letter "a" can be can be 2 letters represent lamp colors;
The letter “b” can be “3RP”, “3NP”, “5RP”, “5NP”, “7RP” or “7NP” for Photocontrol type provided or blank for no
Photocontrol provided;
The letter “c” can be “10SP” or “20SP” for Surge-Protective Device type provided or blank for no Surge-Protective
Device provided;
The letter“d” can be “PS” or “MS” for Motion Sensor type provided or blank for no Motion Sensor provided;
The letter“e” can be “AM”, “DM”, “Y
M”, “A&D” or “FM” to represent mounting bracket types;
The letter “f” can be “S” or blank for Socket provided or not;
The letter "g"can be any two-digit number to represent CCT.
Advantage：：
 Lumileds or Seoul Chip, high CRI
 IP65 driver, Input voltage 100-277Vac
 Optional Photocell and A&D
surge protection function
 No UV or IR in the beam
 Easy to install and operate
 Energy saving, Long lifespan
 Light is soft and uniform, Safe to eyes YM
 Instant start, NO flickering, NO hu
mming DM
 Green and eco-friendly without mercury.
Application：：
 Outdoor basketball court, tennis court.
 Badminton court, the football field.
 The school playground, stadium.
 Community leisure entertainment plaza, road lamp etc. FM AM
SKU # Model # Pcs/Box Dimensions Weight Pallet Quantity Pallet Weight Pallet Dimensions
151630 BLT-S-GB-150W 1
20” X 16” X 7” 14 Lb
151631 BLT-S-GB-300W 1
28” X 16” X 7” 21 Lb
151632 Slip Fitter Mount 1
10” X 5” X 5” 6 Lb
151633 Straight Arm Mount 1
10” X 5” X 5” 6 Lb
151634 Yoke Mount 1
10” X 5” X 5” 4 Lb
User Notice
Trouble Shooting
• Please turn off the
power before installing or
changing assembly parts.
• The input voltage
and lamps should
be matching. Before
connecting the power
line, please make sure
the wiring section is
insulated.
• Only professionals should
install and disassemble
the lamps.
• Flickering light - Turn off the power and turn on again in 3 minutes. If the same phenomena
occurs, then call Support.
• Not working - Please check all power connections.