Specification

4
[phone] • www.BeyondLEDTechnology.com
Due to continuous product improvement, information in this document is subject to change.
LED Area Light
Bear Series
LED AREA LIGHTS
300W Distribution Diagram
LED Shoebox Light Page 3 of 4
LIGHT DISTRIBUTION TESTING PARAMETERS
NOTICE FOR USER
 Please turn off power before install or change assembly parts.
 The input voltage and lamps should be matched, after connecting the power line,
Please make sure the wiring section is insulated.
 No-professionals, must not install and disassemble the lamps.
TROUBLE SHOOTINGS
Troubles Check points
Flickering of the light
Turn off the power and turn on again in 3 minutes.
If same phenomena occur, then call agencies.
Out of working Please check the connection.
LED Shoebox Light Page 3 of 4
LIGHT DISTRIBUTION TESTING PARAMETERS
NOTICE FOR USER
 Please turn off power before install or change assembly parts.
 The input voltage and lamps should be matched, after connecting the power line,
Please make sure the wiring section is insulated.
 No-professionals, must not install and disassemble the lamps.
TROUBLE SHOOTINGS
Troubles Check points
Flickering of the light
Turn off the power and turn on again in 3 minutes.
If same phenomena occur, then call agencies.
Out of working Please check the connection.
LED Shoebox Light Page 3 of 4
LIGHT DISTRIBUTION TESTING PARAMETERS
NOTICE FOR USER
 Please turn off power before install or change assembly parts.
 The input voltage and lamps should be matched, after connecting the power line,
Please make sure the wiring section is insulated.
 No-professionals, must not install and disassemble the lamps.
TROUBLE SHOOTINGS
Troubles Check points
Flickering of the light
Turn off the power and turn on again in 3 minutes.
If same phenomena occur, then call agencies.
Out of working Please check the connection.