Instructions / Assembly
Bay Area Compliance Laboratories Corp. (Dongguan)
No.69, Pulongcun, Puxinhu Industrial Area Tangxia ,
Dongguan, Guangdong, China.
The IAS Accreditation Number TL-460
Report No. R2DG181011050-10
Page 3 of 13
1 - General Information
1.1 Description of LED Light Sources
Sample Size:
50 PCS samples were received on 2017-01-18. The samples were numbered from 1 to 25 and 26 to 50.
Manufacturer:
Lumileds Holding B.V.
Part Number:
L128-2780RA35000Q1
Part Type:
LED Package
Drive Level:
DC 150mA
Nominal CCT:
2700K
Power:
0.5W
Current Density per LED die:
402.25mA/mm
2
Power Density per LED die:
1.34W/mm
2
CRI:
80
Die Spacing:
N/A
Note:
1. The applicant Lumileds Holding B.V. declare that their products with model L128-2780RA35000Q1 are the same to
the products tested in report # RSZ170118517-10-9000 and is authorized by original applicant to use their test data.
2. All the data in previous report (RSZ170118517-10-9000) is shared in this report.
Sampling Method:
LED samples for IESNA LM-80 testing consist of units built from a minimum of three manufacturing lots with each manufacturing lot
built from different wafer lots built on non-consecutive days.
These manufacturing lots are picked to represent a wide parametric distribution.
Family products covered by this report:
According to ENERGY STAR
®
Requirements for the Use of LM-80 Data, the following products can be covered by this report base on
the information and declaration provided by manufacturer. The information of these models shows that the covered products meet all
section 4 requirements of ENERGY STAR
®
Requirements for the Use of LM-80 Data (September 28, 2017)
This report covers the following models:
Tested
model
Multiple
model
Total Input
Current
(mA)
Power
(W)
Number
of dies
Driver current
per die(mA)
Current
Density per Die
(mA/mm
2
)
Power
Density per
PCB(W/mm
2
)
Die
Spacing
(mm)
L128-
2780RA350
00Q1
L128-
xx80RA350
0xxx
150
0.5
1
150
402.25
0.05102
N/A
Note:
1. The first and second x denote designates nominal CCT (27=2700K, 30=3000K, 35=3500K, 40=4000K, 45=4500K, 50=5000K,
57=5700K, 60=6000K, 65=6500K).
2. The last three x denote designates= Lumileds internal codes (0A1, 0B1, 0C1, etc. =shares the same base part).
1.2 Standards Used:
ANSI/IES LM-80-15: IES Approved Method for Measuring Lumen Maintenance of LED Light Sources.
CIE 127:2007: Measurement of LEDs (This standard was not accredited by IAS)
ENERGY STAR
®
Requirements for the Use of LM-80 Data (This standard was not accredited by IAS)